Best electric scooter phone holder and mount
Phone holders is one of the many electric scooter accessories you will need. They help you ride comfortably and safely.
Vibrelli phone mount ~
Those things we did not like
- The hex key is needed for installation
This Vibrelli phone mount attaches directly to your handlebars, making it perfect for electric scooters, even though it requires a hex key. Well, at least it won’t get stolen.
The strong clamp is designed to fit smartphones up to 3.7″ wide, which makes it the best electric scooter phone mount for extra-wide phones.
Three silicone bands wrapped around your smartphone form a tight, wraparound structure to secure it from the sides. If you want extra security, you can put two or three on.
You can also access ports and headphone jacks through the silicone bands that only cover the corners.
Its ball and socket design, which allows for easy swiveling, also allows for adjusting the angle of this mount.
Roam~Best Universal Electric Scooter Phone Holder
Our dislikes
Fast release is not possible
Phones up to 3.5″ wide can be mounted on the Roam phone mount.
Mounts can be adjusted to fit handles between 7/8″ and 1-14″ in diameter thanks to its handlebar compatibility.
Your smartphone is held securely by a large clamp made of hard plastic with a silicone net that grips the corners.
Unlike rubber, silicone can stretch up to four times its size and remains highly durable.
Despite its low price, this mount is highly secure.
The six points of contact guarantee that your phone remains secure in all directions during a ride.
Visnfa phone mount ~ Most Affordable Phone Mount for Electric Scooter
There were a few things we didn’t like
- When the phone is not connected, it vibrates
Using stainless steel clamps, the Visnfa phone mount supports the corners of the phone without clamps.
From 4 to 7 inch smartphones are supported. With its superior design and stability, this alternative design is a good option.
Using a push of a button, the clamp arms are sized elastically and open and close automatically.
As well, you can adjust the angle of the mount thanks to the spherical universal joint.
A simple clamp and no tools are needed for installation.
While providing maximum stability and near-full screen visibility, the durable, stylish edges prevent scrapes and other problems.
Read more on electric scooter for hill climbing
Lamicall cell phone clamp~ The easiest mounting option for electric scooter phones
There were a few things we didn’t like
It is not possible for you to take photos or record videos
With the Lamicall cell phone clamp, your phone will be held in place by hard plastic clamps that grip every corner tightly.
Additionally, it is highly compatible with 4.7 to 6.8 inch smartphones.
In addition to the silicone pads below the phone, these pads also provide shock protection and stability, decreasing overall vibrations.
The screen is easy to adjust and you can install the handlebars easily.
An electric scooter phone holder that has a three-point design is unique and helpful for holding the phone on an electric scooter.
Tiakia e-scooter phone holder ~
There were a few things we didn’t like
Designed for on-road use, but not off-road
The Tiakia e-scooter phone holder is one of the more clever designs on the list, with a clamp design that covers most of the bottom half of the phone.
The result is that it is compatible with a wide range of smartphones, covering just about all those available between 3.5 and 7 inches.
There is no chance of falling due to triple protection provided by the bottom and clamp supports.
The top is open, which allows full access to the headphone jack and camera. There are plenty of adjustment options thanks to the sphere joint.
Further, the inside of the mount has a mesh silicone pad that absorbs movement and noise, making it the most shock-absorbing electric scooter phone holder.
Read more on electric scooter safety and children.
CAW.CAR’s metal phone mount ~ The best mobile phone mount for electric scooters
Those things we did not like
The side buttons may be triggered by clamps
Using CAW.CAR’s metal phone mount, you can mount your phone onto a wide range of handlebars measuring between 0.2″ and 1.9″.
There are silicone grips on the corners of this case, and a heavy-duty metal clip with a rubberized coating as a clamp that fits a phone from 4.1 to 6.5 inches.
Regardless of how rough the ride may be, there will be no movement.
With the 360-degree rotation of the grip, you can access all of your phone’s features including the headphone jack, touchscreen, and buttons with minimal obstruction.
Read more on Waterproofing electric scooters
VUP phone holder for electric scooter
There were a few things we didn’t like
- Off-road use is not recommended
With the VUP phone holder, the top and bottom of the phone are securely held in place by the three-point clamp structure.
These grips come with rubber pads that provide anti-slip and anti-vibration support, preventing the phone from moving during use.
You’ll be glad to know that the mount can accommodate phones ranging from 4.0 to 6.7 inches. It features 360-degree adjustment and easy swiveling.
The handlebar clamp is easy to install.
Read more on 3-wheel e-scooters.